Use and Care Manual

T D S
P D
SEAL-ONCE® NANO + POLY Premium Wood Sealer
combines proprietary nanotechnology with the strength of
polyurethane to provide 360° of protection.
NANO + POLY penetrates to form a long-lasting water
resistant shield around the wood fibers, helps to resist rot,
decay, mold and mildew. It also stabilizes wood, eliminating
warping and cupping.
In addition, NANO + POLY creates a durable surface coating
that protects against wear and tear, and water damage.
NANO + POLY is a water-based, eco-friendly sealer that will
not harm pets, plants, or people, and is safe for
application around and over fresh and salt water.
NANO + POLY goes on milky white and dries clear. It creates
a UV-stable coating that preserves the natural color of the
wood and resists weathering and decay. It is also available in
semi-transparent tints.
F
Eco-friendly
Non-toxic; will not harm pets, plants or people
Ultra-low VOC
Forms a long-lasting water resistant shield
Will not peel
Water based formula
Flexible, breathable barrier
Helps resists warping, cupping, wood rot & decay
Preserves old or new wood, extending its natural life
Available in 7 ready mixed colors
Helps resists mold & mildew growth
Soap & water cleanup
Tinted formula provides additional UV protection
Excellent for use in high traffic areas
P C
Color Milky white liquid, dries clear
Flash Point None
pH 7+
Solvents Water
lbs/gal 8.4
Specific Gravity 1.007
Viscosity 4.2 cps
Application Temp. 50°F/10°C* - 95°F/35°C
Odor Nil
VOC Content 37g/L**
*Do not apply when air or surface temperature is below 50°F/10°C or may fall below
50°F/10°C within 24 hours after application.
**VOC Content determined via EPA Method 24.
R A
Decks & Fences
Swing Sets
Shakes
Pergola
Wood siding
Log homes
Thermally modified
Outdoor furniture
P S
1 Quart Can | 1 Gallon Can | 5 Gallon Pail | 55 Gallon Drum
F C
55
TM

Summary of content (2 pages)