Use and Care Manual

Safety Data Sheet
S E AL - O N C E ® N A N O + P O L Y
Page 2 of 3
6. ACCIDENTAL RELEASE MEASURES
7. HANDLING AND STORAGE
8. EXPOSURE CONTROLS / PERSONAL PROTECTION
9. PHYSICAL & CHEMICAL CHARACTERISTICS
11. TOXICOLOGICAL INFORMATION
Extinguishing Media: Water spray, dry chemical, carbon dioxide foam. Do not direct solid stream of water or foam into
burning pools.
Other Fire or Combustion Hazards: Incomplete combustion can produce carbon monoxide.
Fire Fighting Instructions: Avoid breathing smoke and vapor.
Fire Fighting Equipment: Self-contained breathing apparatus and protective clothing.
Personal Protection: Wear protective gloves and eye protection plus rubber boots when containing large spills.
Precautions: Do not allow to enter sewers / surface or ground water.
Containment and Clean-up: Large spills: contain with dikes, collect, and filter for reuse.
Small spills: collect or absorb with oil absorbent pads.
Clean contaminated areas with soap and water. All spill response and disposal should be carried out in
accordance with local, regional and federal regulations.
General: Keep containers closed to minimize evaporation and skin formation.
Handling: Use normal precautions and protective equipment to avoid exposure to eyes and skin.
Storage: Store at ambient temperature, above 5ºC / 40ºF. Product can be damaged by freezing.
Ventilation: Good ventilation in work area, atmospheric pressure.
Personal Protection: Eyes: safety glasses or splash goggles
Hands: protective gloves
Other: synthetic apron for cleanliness
Physical State: Liquid Odor: Low
Appearance/Color: Milky white Specific gravity: 1.02
Flash Point: No flash Auto ignition temperature: n/a
Boiling Point: 100ºC / 212ºF pH: 8-9
VOC: 44 grams/liter
Reactivity: Non-reactive under normal temperatures and conditions.
Chemical Stability: Stable under normal temperatures and conditions.
Possibility of Hazardous Reactions: Under normal temperatures and conditions, hazardous reactions will not occur.
Conditions to Avoid: None known.
Incompatible Materials: Strong oxidizing agents.
Hazardous Decomposition Products: Under normal temperatures and conditions, hazardous decomposition products should notbe
produced. Burning may produce carbon monoxide and/or carbon dioxide.
No known health hazard, no data available.
10. STABILITY AND REACTIVITY
5. FIRE FIGHTING MEASURES