SDS

Page 3 of 8
Safety Data Sheet
acc. to OSHA HCS (29 CFR 1910.1200)
Printing date 05/07/2015 Reviewed on 05/07/2015
Trade name: Seal-Krete Multi-Surfac e Acrylic Water Repellent
(Contd. of page 2)
40.1.5
·
M ethods and material for containment and cleaning up:
Absorb with liquid-binding material (sa nd, diatomite, acid binders, universal binders, sawdust).
Dispose cont a minated material as waste according to item 13.
Send for recovery or disposal in suitable receptacles.
·
Reference to other sections
See Section 7 for information on saf e han dling.
See Section 8 for information on personal protection equipment.
See Section 13 for disposal information.
7 Handl ing and storage
·
Handling:
·
Precaution s for safe han dling
Prevent formation of aerosols.
Avoid splashes or spray in enclosed areas.
·
Information about protection against explosions and fires:
No special measures required.
·
Condi tions for safe storage, including any incompatibilities
·
Storage:
·
Requirements to b e met by storerooms and receptacles:
Avoid storage near extreme heat , ignition sources or open flame.
·
Information about storage in one common s torage facility:
Store away from foodstuffs .
·
Further information about storage conditions:
Store in cool, dry conditions in well sealed receptacles.
·
Specific end use(s)
No further relevant informat ion available.
8 Exp osure controls/personal protection
·
Additional information about d es i gn of technical systems:
No further data; see item 7.
·
Control parameters
·
Components with limit values that require monitoring at the workplace:
The product does not c ontain any rele vant quantiti es of materials with critical values that have to be
m on itored at the workplace.
·
Additional information:
The lists that were valid during the creation were used as basis.
·
Exposure co ntrols
·
Personal protective equipmen t:
·
General protective and hygienic m eas ures:
The usual precautionary measures for handling chemicals should be followed.
Keep away from foodstuffs, beverages and feed.
Do not inhale gases / fum es / aerosols.
Avoid contact with t he e yes and skin.
·
Engineering controls:
No further relevant informat ion available.
·
Breathing equipment:
Not required under normal conditions of use.
For large spills, respiratory protection may be advisable.
·
Protection of hands:
Not required under normal conditions of use.
Protection may be required for spills.
(Contd. on page 4)