Use and Care Manual
TECHNICAL INFORMATION
• ASTM D-1475: pounds/gallon 8.45 ± .15
• Viscosity: 25 seconds, #4 cup
• ASTM E-70: pH 8.75
• ASTM D-2369-93: solids 11.50 ± 1%
• Clean-up: soap and water
• Shelf life: 2 years min. (closed container)
• Visual appearance: milky white (wet); dries clear
• ASTM D-1640: dry-to-touch 1-2 hours; dry to recoat
2-3 hours; dry to light foot traffic 24 hours; dry to
vehicular traffic 72 hours
• ASTM D-3363 hardness: pencil F
• ASTM D-3359B intercoat adhesion: excellent
• Gloss: 25 (1 coat)
• ASTM G-53 ultraviolet resistance: excellent
• Gloss retention: excellent
• Tire marking: resistant to most tires
• Propietary urethane-acrylic blend
• VOC: less than 50 g/L (EPA Method 24)
CHEMICAL/SOLVENT RESISTANCE - ASTM D-1308
(One hour spot test)
• Gasoline: resistant
• Oil: resistant
• Water: resistant
• Salt: resistant
• Chlorine: resistant
FEATURES
• Seals and protects painted, stained or bare concrete
• Seals in color
• Reduces pockmarking and cracking
• Clear nish, will not yellow
• Premium, urethane-fortied acrylic formula
LIQUID PROPERTIES
• Water-Based
• Odor: Low
LIMITED WARRANTY:
Manufacturer/Seller makes no warranty
of any kind except that this product is free from defect and is
of merchantable quality. Buyer remedy for breach of warranty
is limited to replacement of SEAL-KRETE product or refund of
purchase price. Convenience Products will not be responsible
for labor or the cost of labor for removal or application of any
product.
TECHNICAL SUPPORT: For more information on surface prep
or application guidelines, or to obtain a Material Safety Data
Sheet, call 1-800-323-7357, M–F (8:00 am–5:00 pm EST) or
visit our website at www.seal-krete.com.
•EXCELLENTDURABILITY
•INTERIOR/EXTERIORUSE
•FORCOATED&UNCOATED
HORIZONTALSURFACES
PREMIUM LOW GLOSS SEALER
PREMIUM LOW GLOSS SEALER
CLEAR-SEALCLEAR-SEAL
CLEAR-SEAL
WATERPROOFS & SEALS PAINTED, STAINED,
TEXTURED & BARE CONCRETE SURFACES
RESISTANT TO MOISTURE, SALT, CHLORINE, OIL
& HOT TIRE PICKUP
HIGHLY DURABLE NON-YELLOWING ACRYLIC
PREMIUMPROTECTIVESEALER
Convenience Products
306 Gandy Rd., Auburndale, FL 33823 USA
www.seal-krete.com
Questions or comments? e-mail: tech@seal-krete.com
or call 1-800-323-7357
64068-051313-SK
RESISTSHOTTIREPICKUP
PROVIDESADURABLE,NON-YELLOWINGFINISH
WATERPROOFSCONCRETESURFACES


