SDS

Page 4 of 9
Safety Data Sheet
acc. to OSHA HCS (29 CFR 1910.1200)
Printing date 05/06/2015 Reviewed on 05/06/2015
Trade name: Seal-Krete Clear Seal
(Contd. of page 3)
40.1.5
·
Engineering controls:
No further relevant informat ion available.
·
Breathing equipment:
Not required under normal conditions of use.
For spills, respiratory protec t ion may be advisable.
·
Protection of hands:
Protective gloves
The glove material has to be impermeable and resistant to the product/ the substance/ the preparation.
Selection of the glove material on consideration of the penetration times, rates of diffusion and the
degradation
·
M aterial of gloves
The selection of the suitab le gloves does not only depend on the material, but al so on fur ther marks of
quality an d varies from manufacture r to manufacturer. As the product is a preparation of several
substances, t he r e sistance of the glove material can not be calculated in advance and has therefore to be
checked prior to the application.
·
Penetration time of glo ve material
The exact break through time has to be found out by the manufacturer of the protective gloves and has to
be observed.
·
For the permanent contact gloves made of the following materials are suitab le:
Butyl rubber, BR
Nitrile rubber, NBR
·
Eye protection:
Safety glass es
·
Body protection:
Protective work clothing
·
Limitation and supervision of exposu re into th e environment
No further relevant informat ion available.
·
Risk manag ement measures
See Section 7 for additional inform at ion.
No further relevant informat ion available.
9 Physical and chemical properties
·
Information on basic physical and chemical properties
·
General Information
·
Appearance:
Form:
Liquid
Color:
Clear
·
Odor:
Ammonia-like
·
Odor threshold:
Not determined.
·
pH-value at 20 °C (68 °F):
8.5
·
Change i n condition
M elting point/Melting range:
Undetermined.
(Contd. on page 5)