SDS

SEAL-ALL CLEAR
Section 2. Hazards identification
Prevention
:
P280 - Wear protective gloves. Wear eye or face protection.
P210 - Keep away from heat, hot surfaces, sparks, open flames and other ignition
sources. No smoking.
P241 - Use explosion-proof electrical, ventilating, lighting and all material-handling
equipment.
P242 - Use only non-sparking tools.
P243 - Take precautionary measures against static discharge.
P233 - Keep container tightly closed.
P271 - Use only outdoors or in a well-ventilated area.
P261 - Avoid breathing vapor.
P264 - Wash hands thoroughly after handling.
P272 (OSHA) - Contaminated work clothing must not be allowed out of the workplace.
Response
:
P304 + P340 + P312 - IF INHALED: Remove person to fresh air and keep comfortable
for breathing. Call a POISON CENTER or physician if you feel unwell.
P303 + P361 + P353 - IF ON SKIN (or hair): Take off immediately all contaminated
clothing. Rinse skin with water or shower.
P302 + P352 + P363 - IF ON SKIN: Wash with plenty of soap and water. Wash
contaminated clothing before reuse.
P333 + P313 - If skin irritation or rash occurs: Get medical attention.
P305 + P351 + P338 - IF IN EYES: Rinse cautiously with water for several minutes.
Remove contact lenses, if present and easy to do. Continue rinsing.
P337 + P313 - If eye irritation persists: Get medical attention.
Storage
:
P405 - Store locked up.
P403 - Store in a well-ventilated place.
P235 - Keep cool.
Disposal
:
P501 - Dispose of contents and container in accordance with all local, regional, national
and international regulations.
Hazards not otherwise
classified
:
None known.
Section 3. Composition/information on ingredients
butanone
≥25 - ≤50
78-93-3
acetone
≥10 - ≤25
67-64-1
2-ethylhexyl 10-ethyl-4,4-dimethyl-7-oxo-8-oxa-3,5-dithia-
4-stannatetradecanoate
≤0.3
57583-35-4
Ingredient name
CAS number
%
There are no additional ingredients present which, within the current knowledge of the supplier and in the
concentrations applicable, are classified as hazardous to health or the environment and hence require reporting
in this section.
Substance/mixture
:
Occupational exposure limits, if available, are listed in Section 8.
Mixture
Any concentration shown as a range is to protect confidentiality or is due to batch variation.
Immediately flush eyes with plenty of water, occasionally lifting the upper and lower
eyelids. Check for and remove any contact lenses. Continue to rinse for at least 10
minutes. Get medical attention.
Section 4. First aid measures
Eye contact
:
Description of necessary first aid measures
Date of issue/Date of revision
:
4/1/2020
Version
:
1.07
2/15