User guide

SEAGULL 5000i User Guide
95
Question:
Does the Seagull 5000
i unit support over the air (OTA) firmware upgrade?
Answer:
Seagull 5000
i does support BDU over the air (OTA) firmware upgrade provided it has
GmPRS tracking enabled and the device is already connected to the server. Server will
issue a command to the unit to retrieve the appropriate firmware. Please refer to the latest
protocol document for more information.
Question:
Inside the call log, why am I getting time offset for all the call history?
Answer:
You need to manually configure your time zone in order to get an accurate call log. You
can go to Phone manager>>Local time zone to adjust your time zone. The default time
zone is UTC+8.
Question:
What can I do with the external I/O interface?
Answer:
The I/O connector allows you to install an external buzzer and an external alert button.
The buzzer is working as an external ringer to indicate an incoming call. The external alert
button behaves in the same manner as the internal Alert button. A momentary push button
is recommended. Below illustrates the recommended configurations.
In order to enable/disable this external alert button, you can go to Settings>>Alarm
reporting>>Panic button>>External for configuration. In order to enable/disable the
external buzzer, you can go to Settings>>Alarm reporting>>External buzzer for
configuration.