User guide

SEAGULL 5000i User Guide
94
Common problems
Satellite signal strength is inadequate (indicated in SEAGULL 5000i display).
The cable connections are not proper and firm.
The SIM card may have been not installed properly or it may have been expired.
FAQ
Question:
How can I access the WebConsole?
Answer:
You need a PC/laptop and an Ethernet cable to connect to the RJ45 port of the BDU in
order to access the WebConsole. Open a web browser and type http://192.168.0.1 in the
address field. The default user name and password are admin.
Question:
Error ‘executing AT+cpin?’ is seen when I am trying to access the WebConsole. Why?
Answer:
Because there is only one AT command interface with the modem, if the modem is
busy processing another AT command (for example activating GmPRS or CS call), then
another Terminal Equipment (TE) try to query information using AT command (in this case
WebConsole), then most probably it will timeout or give error. Refreshing the web page
will usually solve the problem. If not, wait for the SAT LED on the BDU has turned orange or
green before retrying.