User guide

SEAGULL 5000i User Guide
91
• Connect the G3 Fax machine and Seagull 5000i to FaxConnect as shown below.
• Make sure to insert a fax enabled Thuraya SIM card in Seagull 5000
i BDU.
5
Using the FaxConnect (Optional Accessory)
POWER CABLE
HANDSET
PC
BDU FRONT PANEL
FAX M/C FAXCONNECT
Note: Remove the bracket before
plugging in the handset. Re-assemble
the bracket to secure the cable.
5.1 Sending a Fax
5.1.1 Feed the document you wish to send out to the fax machine.
5.1.2 Dial the recipient number in the following format and press the ‘START’ button on
the fax machine.
<00><Country code><Telephone number>
5.1.3 Sending fax will take place in two phases. In the 1st phase, fax machine will scan
the document(s) and send the data to Seagull 5000
i terminal with an icon
being displayed in the webconsole. In the 2nd phase, Seagull 5000
i terminal will
send the fax data out to the recipient through the Thuraya network with an icon
being displayed in the webconsole. During this period, the handset will
display the out-going fax icon
.