User guide

SEAGULL 5000i User Guide
86
Fax
• Setting
1. Number of Retries
• Send
Select this to set the number of retries for outgoing fax. Set to zero indicates
that there will be no attempt to resend the fax when the UE failed to send the
fax.
Note:
Airtime charge may apply for each retry attempt.
• Print
Select this to set the number of retries for fax printing once the UE has received
an incoming fax. Set to zero indicates that there will be no attempt to reprint
the fax when the UE failed to print the received fax to the connected fax
machine.
2. Discard all pending Fax jobs after power cycle
• Select this to discard all pending fax jobs upon power reset. Leave the box
blank for the UE to resume last pending fax jobs when fax transactions are
interrupted due to power reset.
3. Print Report
Select this to configure settings related to the printing of fax reports. The
following settings are available:
• Incoming
a) Enabled
Select this to allow printing of report for incoming fax.
b) Disabled
Select this to disable printing of report for incoming fax.
c) Error Only
Select this to print error report only. Error report is printed when there is any
error detected during the fax transaction.
• Outgoing
a) Enable
Select this to allow printing of report for outgoing fax.
b) Disable
Select this to disable printing of report for outgoing fax.