User guide

SEAGULL 5000i User Guide
16
3. After tightening the connectors, wrap the connectors with self-bonding vinyl tape or
apply silicon sealant to make them waterproof.
4. Fix the O-ring securely in to the groove on the bottom cover.
5. Fasten the bottom cover onto the antenna unit using the 4 screws.
6. Use the U-bolts and the mounting bracket to fix the assembled ADU on to the vessel’s
mounting pole. Tighten the nuts and make sure they will not become loose.
7. Fix the cables to the mounting pole with cable tie.
8. Connect and tighten the RF connectors of SAT and GPS RF cables to the BDU.