Specifications

WWW.SEAGULLMODELS.COM
13
Moving the balance a makes the model
more agile with a lighter and snappier
”feel”. In any case,please start at the lo-
cation we recommend .
With the wing attached to the fuselage,
all parts of the model installed ( ready to
y), and empty fuel tanks, hold the mod-
el at the marked balance point with the
stabilizer level.
Li the model. If the tail drops when
you li, the model is “tail heavy” and you
must add weight* to the nose. If the nose
drops, it is “nose heavy” and you must
add weight* to the tail to balance.
*If possible, rst attempt to balance the
model by changing the position of the re-
ceiver battery and receiver. If you are un-
able to obtain good balance by doing so,
then it will be necessary to add weight to
the nose or tail to achieve the
proper balance point.
86 mm
CONTROL THROWS.
Elevator:
Up : 15 mm
Down : 15 mm
Rudder:
Right : 20 mm
Le : 20 mm