User manual ( SG-Models ) Cessna 208 Grand Caravan 2m15 - 45cc Military

31
.
.
When you are sure that everything is
aligned correctly, mix up a generous
amount of 30 Minute Epoxy. Apply a thin
layer to the top and bottom of the stabi-
lizer mounting area and to the stabilizer
mounting platform sides in the fuselage.
Slide the stabilizer in place and realign.
Double check all of your measurements
once more before the epoxy cures. Hold
the stabilizer in place with T-pins or mask-
ing tape and remove any excess epoxy us-
ing a paper towel and rubbing alcohol.
Epoxy.
Epoxy.
INSTALLING VERTICAL STABILIZER
Using a modeling knife, remove the
covering from over the precut hinge slot
cut into the lower rear portion of the fu-
selage. is slot accepts the lower rudder
hinge.
Remove covering.
7.
1.
2.
6.
5.
Fill Epoxy.
3.