User manual SkyRaider 35-60cc Camouflage 2.20m Seagull

86’’ A-1 SKYRAIDER 35-60cc WARBIRD
Instruction Manual.
8
Attach the ap servo to the ap servo
cover. Center the ap servo (or set the
values to 0 for both up and down) and in-
stall the servo arm perpendicular to the
servo centerline. e clevis will attach to
the arm 13/16 inches (21mm) from the
center of the arm.
3.
4.
Attach the ap linkage to the control
horn. Slide the clevis retainer over the
forks of the clevis.
1.
2.
100mm.
M3 clevis.
M3 lock nut.
Use a pin vise and 3/32-inch (2mm)
drill bit to clear the paint from the ap
control horn.
5.
7.
6.
Route the servo lead for the ap servo
out at the root of the wing. Connect the
ap servo to the radio system. With the
radio system on, place the ap servo into
position.
Attach the clevis to the ap servo arm.
Please see pictures below.
INSTALLING THE FLAP PUSHROD