User manual SkyRaider 35-60cc Camouflage 2.20m Seagull

86’’ A-1 SKYRAIDER 35-60cc WARBIRD
Instruction Manual.
32
THROTTLE SERVO ARM
INSTALLATION
Install adjustable servo connector on the
servo arm and set aside for now.
Install the rudder and elevator servo
arms as shown above.
1.
INSTALLING THE RECEIVER SWITCH
2.
Trim and cut.
Install the switch into the precut hole
in the side of fuselage, or you may hide
switches under main hatch on a custom
home made switch plate as desired.
3/32” Hole.
1.
Elevator servo arm .
Rudder servo arm.
3.
INSTALLING THE ENGINE SWITCH
Trim and cut.
1.
Switch.
2.
Switch.
INSTALLING THE STOPPER
ASSEMBLY
Using a modeling knife, carefully cut o
the rear portion of one of the 3 brass tubes
leaving 1/2” protruding from the rear of
the stopper. is will be the fuel pick up
tube.
Using a modeling knife, cut one length
of silicone fuel line. Connect one end of
the line to the weighted fuel pick up and
the other end to the brass pick up tube.