User manual Giant Zero A6M Gas ARF 50-60cc 2

7
Install the ap control horn using the
same method as same as the aileron con-
trol horns.
Fiberglass control horn
INSTALL FLAP CONTROL HORN
2.
3.
1.
2.
1.
Flap control horn
INSTALLING THE AILERON SERVOS
Because the size of servos dier, you
may need to adjust the size of the precut
opening in the mount. e notch in the
sides of the mount allow the servo lead to
pass through.
Place the servo between the mounting
blocks and space it from the hatch. Use a
pencil to mark the mounting hole loca-
tions on the blocks.
Minimum servo spec.
Torqu e : 194 oz-in (14 kg-cm) @ 6.0V;
236 oz-in ( 17kg-cm) @ 7.4V
Epoxy