User manual Giant Zero A6M Gas ARF 50-60cc 2

Giant Zero A6M Gas ARF 50-60cc, 86”
Instruction Manual.
16
Secure the servos with the screws pro-
vided with your radio system.
.
INSTALLING THE FUSELAGE SERVOS
.
Because the size of servos dier, you
may need to adjust the size of the precut
opening in the mount. e notch in the
sides of the mount allow the servo lead to
pass through.
Install the rubber grommets and brass
collets into all servos. Test t the servos
into the fuselage servo mounts.
Elevator servo
THROTTLE SERVO ARM
INSTALLATION
Install adjustable servo connector in the
servo arm as same as picture below:
1.
1.
2.
1.
2.
3.
Rudder servo arm
INSTALLING THE RECEIVER SWITCH
Install the switch into the precut hole in
the side, in the fuselage.
3/32” Hole.
Trim and cut
.
Switch
Elevator servo
Elevator servo arm
Tailwhell and
Rudder servo
Elevator servo arm Tailwhell arm