User manual

Cessna Turbo Skylane 182
Instruction Manual.
22
4.
5.
6.
4x25mm
7.
8.
Pushrod wire
M4 lock Nut
10.
9.
- Reinstall the servo horn by sliding the
connector over the pushrod wire. Center
the throttle stick and trim and install the
servo horn perpendicular to the servo
center line.
- Move the throttle stick to the closed po-
sition and move the carburetor to closed.
Use a 2.5mm hex wrench to tighten the
screw that secures the throttle pushrod
wire. Make sure to use threadlock on the
screw so it does not vibrate loose.