User manual

83
14.
15.
16.
1.
2.
- Continue to attache M05 at the botton of motor
mount by CA glue (photo 12,13).
- Getting prepase two triange block lenght = 65mm.
- Attach white glue to triangle block.
- Building motor mount was nished.
- Recommend the items necessary to install the
electric power conversion parts included with your
model.
- Model size: .75-.90 size models
- Motor: 50mm 310 rev per volt
- Propeller: 15x10 ~ 16x10
- ESC: 80A
- Lipo Batteries: 8 cell 5200mA
- Attach the electric motor box to the rewall
centered with the cross lines drawn on the elec-
tric motor box and rewall. Using M4x20mm
to secure the motor box to the rewall. Please
see pictures below.
ELECTRIC POWER CONVERSION
- Locate the items neccessary to install the
electric power conversion included with your
model.