User manual
P-47D underbolt 60 Kit
60
Instruction Manual.
- Using a small weight (Weighted fuel pick-up
works well) and string, feed the string through the
wing as indicated.
Because the size of servos dier, you may
need to adjust the size of the precut opening in
the mount. e notch in the sides of the mount
allow the servo lead to pass through.
- Place the servo between the mounting blocks and
space it from the hatch. Use a pencil to mark the
mounting hole locations on the blocks.
- Use drill bit in a pin vise to drill the mouting
holes in the blocks.
- A string has been provided in the wing to pull the
aileron lead through to the wing root. Remove the
string from the wing at the servo location and use
the tape to attach it to the servo extension lead. Pull
the lead through the wing and remove the string.
INSTALLING THE AILERON SERVOS
1.
4.
5.
2.
3.
Minimum servo spec.
Torque : 80 oz-in (5.8 kg-cm) @ 4.8V; 100 oz-
in (7.2 kg-cm) @ 6.0V