User manual

81
3.
- Attach the motor to the front of the electric
motor box using four 4mm blind nut, four
M4x15mm hex head bolts to secure the motor.
Please see picture shown.
- Locate the plywood battery tray to the fuse-
lage. Tighten the screws using machine screws
M3x15mm to secure the tray in position.
4.
5.
- Attach the speed control to the side of the
motor box using two-sided tape and tie wraps.
Connect the appropriate leads from the speed
control to the motor. Make sure the leads will
not interfere with the operation of the motor.
6.