User manual

35
- A scale pilot is included with this ARF. e Pilot
included ting well to the coc pit. (or you can order
others scale pilot ures made by SG Models. ey
are available at SG Models distributors.)
- If you are going to install a pilot ure, please use
a sanding bar to sand the base of the ure so that
it is at.
- Position the pilot ure on the canopy or as show.
Locate the oval shaped on the canopy or and re-
move the covering. Use epoxy to glue this into the
base of the pilot ure and glue the cockpit panel in
place with C/A glue, please see pictures as shown.
8.
9.
10.
- Position the canopy onto the fuselage. Trace
around the canopy and onto the fuselage using a
felt-tipped pen.
- Apply a bead of canopy glue around the inside
edge of the canopy. Position the canopy onto the
hatch. Use tape to hold the canopy secure until the
glue fully cures.
11.
12.
- Install the canopy and secure it with M2x6mm
screws.
13.