User manual
29
2.
3.
- Use plywood template to hold in place the fuel
tank with C/A glue to secure the fuel tank inside
the fuselage.
- Connect the lines from the tank to the engine and
muer. e vent line will connect to the muer
and the line from the clunk to the carburetor.
4.
MOUNTING THE ENGINE - 2 stroke
- Position the engine with the drive washer
(150mm) forward of the rewall as shown.
1.
- Use a pin drill and 4mm drill bit to drill a small
indentation in the mount for the engine mounting
screw.
5.
2.
Blow through one of the lines to ensure the fuel
lines have not become kinked inside the fuel tank
compartment. Air should ow through easily.