User manual

NEMESIS
Instruction Manual.
22
INSTALLING THE SPINNER
- Install the spinner backplate, propeller
and spinner cone.
1.
e propeller should not touch any
part of the spinner cone. If it does, use a
sharp modeling knife and carefully trim
away the spinner cone where the propel-
ler comes in contact with it.
180mm
15.
Epoxy
16.
Balsa stick
Attach the speed control to the side of
the motor box using two-sided tape
and tie wraps. Connect the appropriate
leads from the speed control to the mo-
tor. Make sure the leads will not interfere
with the operation of the motor.
17.
18.
19.
Speed control
Battery