User manual

NEMESIS
Instruction Manual.
18
3.
4.
5.
Use a drill and drill bit to drill the holes
for the cowl mounting screws. Make sure
the cowl position is correct before drill-
ing each hole.
With the muer, needle valve, and spark/
glow plug removed from the engine, slide
the cowl in place over the engine. Tem-
porarily install the propeller and spinner
in order to d the exact location of the
cowl. When satised with the cowl place-
ment, secure the cowl to the fuselage us-
ing masking tape.
Install the muer and muer extension
onto the engine and make the cutout in
the cowl for muer clearance. Connect
the fuel and pressure lines to the carbu-
retor, muer and fuel ler valve. Secure
the cowl to fuselage using the M3x10mm
socket head screws. Putting a small length
of silicon fuel tube under the head of the
screw helps with vibration.
6.
7.
M3x10mm
8.