Specifications

7
www.seagullmodels.com
Rudder control horn:
Using the same techniques used aileron
control horn. See picture below.
RUDDER CONTROL HORN.
1 sets.
Fuselage.
18mm.
Epoxy.
Rudder.
Rudder.
Aluminum Washer.
CONTROL HORN
M3 SCREW.
Aluminum Washer.
Fuselage.
Rudder control horn.
3x40mm.
Mark and drill 4 holes for engine mount.
Insert 4 blind nuts to firewall.
See pictures below.Make yourself the
template of your engine on paper.
ENGINE MOUNT INSTALLATION.
4x30mm.
5.5mm.
Thread locker glue.
Epoxy.
M3 LOCK NUT.