Specifications

Jumper 25
Instruction Man u al
9
INSTALLING THE FUEL TANK
TOOLS REQUIRED
Pushrod wire

1)
Using a modeling knife, cut one lengths
of fuel line 20” long. Connect one line to the
vent tube and one line to the fuel pick up tube
on the stopper. See picture bel low.

2)
Feed both lines through the fuel tank
com part ment and through the predrilled hole
in the  re wall. Pull the lines out from be hind
the en gine, while guid ing the fuel tank into
place. Push the fuel tank until the front of the
tank touches the  rewall.
Blow through one of the lines to ensure
the fuel lines have not become kinked
in side the fuel tank com part ment. Air should
 ow through easily.
silicon tubing not inclued
Fuel tank attachment
Pushrod wire