Specifications

WWW.SEAGULLMODELS.COM
23
M2 lock nut.
M2 clevis.
810mm.
.
Elevator pushrod.
Elevator pushrod.
M2 lock nut.
M2 clevis.
810mm.
820 mm
RUDDER PUSHROD HORN
INSTALLATION.
Rudder control horn
M2 lock nut.
M2 clevis.
810mm.
M2 lock nut.
M2 clevis.
.
840 mm
810 mm
Rudder pushrod.
INSTALLATION PILOT AND CANOPY.
1) Locate items necessary to install pilot and
canopy.
2) A scale pilot is included with this ARF.
e Seagull Pilot included tting well
to the cockpit. (or you can order others
scale pilot gures made by Seagull fac-
tory. ey are available at Seagull factory.
ey are available at Seagull distributors.)
If you are going to install a pilot gure,
please use a sanding bar to sand the base of
the gure so that it is at.
3) Position the pilot gure on the canopy
oor as show. Locate the oval shaped on the
canopy oor and remove the covering. Use
epoxy to glue this into the base of the pilot
gure and glue the cockpit panel in place
with C/A glue, please see pictures as shown.