Instructions for use JP-5500030

GEEBEE. Instruction Manual
20
Attach to servo arm in fuselage.
M2 clevis. M2 Lock nut.
Attach to elevator - rudder control horn.
 2) Connect the elevator and rudder servos
to your radio’s receiver and turn on the sys-
tem. Set the trim tabs on the transmitter to
neutral and center the servo arms. The eleva-
tor and rudder servo arms should be perpen-
dicular to the servos.
 3) One at a time, hold the pushrods in po-
sition over the respective servos to check for
proper servo direction. If any servo turns in
the wrong direction, switch your radio’s re-
versing switches as necessary to achieve the
correct direction.
Elevator.
Elevator.
Rudder.
Throttle.
Switch.
Elevator pushrod.
Rudder pushrod.
Control horn.
Metal clevis.
M2 lock nut.
Elevator pushrod.
Rudder pushrod.
Elevator.
Elevator.
Rudder.