User manual

56
TS-112P, TS-212P and TS-251C
1. Loosen the screws on the rear (top and bottom) of the NAS. Remove the case cover
of the NAS by sliding it apart (see the underside of the NAS for visual indicators of
the NAS case being locked/unlocked.)
2. Install the hard drives:
a. For TS-112P: Place the hard drive in the hard drive cradle and slide it forward
to lock it into the connector. Secure the screws on the slides of the hard
drive.
b. For TS-212P and TS-251C: Place the first hard drive in the hard drive cradle