User manual

ensure that they are the same size and ideally use the same type of RAM for both

memory slots. The maximum supported memory is 8GB combined.

7. Reattach the hard drive cage to the NAS. Please ensure that it correctly plugs into the

slot.

8. Secure the hard drive cage by fastening the four inner screws (for the 4-bay NAS,

please fasten the two additional top screws.) Then reattach the case cover of the NAS

by gently sliding it back together.

9. Fasten the two/four screws onto the rear of the NAS.

10. Reinsert your hard drives to the NAS.