User guide

Seagate Travan 40GB User Guide 11
3. Attach or remove mounting brackets
Are you mounting the drive in a 3.5-inch or
5.25-inch drive bay?
• If you are mounting the drive in a 5.25-inch
drive bay and your drive did not come with
brackets already attached, you must attach
mounting brackets to each side of the drive,
as shown in Figure 5.
• If you are mounting the tape drive in a 3.5-
inch drive bay, you may need to remove the
mounting brackets from each side of the
drive.
4. Mount the drive.
Slide the drive into an unused drive bay until
the bezel is flush with the front of the computer.
The Drive-activity light/Eject button should be
on the upper left, as shown in Figure 6. Secure
the drive using four mounting screws. Do not
overtighten the screws.
Figure 5
Figure 6
5.25-inch
drive bay
3.5-inch
drive bay
Drive-activity light /
Eject button
Drive-activity light /
Eject button
Drive-activity light /
Eject button
TR40IG.P65 01/07/2002, 8:41 AM11