User guide

Installation & Setup User Guide
revision 143 — 67
and it is also located in the Belkin F5U208 USB Drivers\Windows XP
directory on Disc 2 of the B.A.S.I.S. Installation Disk Set.
1. CLOSE ALL WINDOWS PROGRAMS before installing the VideoBus
software. The installation will not work correctly if any other Windows
programs are open during the installation.
2. Connect the camera and CCTV switcher (if necessary) to the Belkin USB
VideoBus II.
3. Connect the Belkin USB VideoBus II to a free USB port on your computer,
and then connect the camera to a power source.
4. The hardware wizard will recognize the device, and the Welcome to the
Found New Hardware Wizard window opens.
a. Select the Install from a list or specific location (Advanced) radio
button.
b. Click [Next].
5. The Please choose your search and installation options window is
displayed.
a. Verify that the Search for the best driver in these locations radio
button is selected.
b. Insert Disc 2 of the B.A.S.I.S. Installation Disk Set into the CD-ROM.
(Depending on how your system is configured, the setup application for