User guide

4: CCD/CCTV Video Setup
54 —
revision 143
Note: This chapter is for configuring the CAM-CCP500K and CAM-CCP500K-
EU. To configure the CAM-500K-USB or the CAM-500K-USB-EU, please
refer to Chapter 5: CCD/CCTV Video Setup for USB Devices on page 65.
• Replacement fixed diffused light with power supply.
• DPS060200-P5: Replacement camera power supply for CAM-CCP-500K.
• EHK-K42U-A Professional Continuous Lighting Kit: Two 600-watt
quartz lights, two bounce back white umbrellas, two stands, mounting
brackets and carrying case.
If you’re setting up a CCTV video station you need the following hardware:
• CCD Video camera: The camera must output video in one of the following
formats:
–RGB: The FlashPoint Lite 3D and FlashPoint 3D Plus do not support
this format.
– NTSC S-Video
– NTSC Composite
– PAL S-Video
– PAL Composite
• Video cable(s) and possible CCTV switcher: The cable(s) needed depend
on the model of FlashPoint board you have, the number of CCTV cameras
the computer is supposed to connect to and the video format being used. The
Hardware included with different image capture packages
CCP601 Digital Zoom 1/4 inch color CCD camera with autofocus/Iris 32X zoom lens 450 lines S-Video camera with built-in 16X AF lens Fixed diffused light with tilt head Camera and light 110 VAC power supplies Camera and light 220 VAC power supplies S-Video Cable 12-foot length Image capture card USB adapter kit Tripod with pan tilt mounts Tripod with pan tilt mounts with European plugs and cables
CAM-CCP500K X X X X X X X X X
CAM-CCP500K-EU X X X X X X X X X
CAM-500K-USB X X X X X X X X X
CAM-500K-USB-EU X X X X X X X X X