User guide

N: Encryption
316 —
revision 143
Secure
• ‘All’ in the Protocol dropdown
• ‘IP Address’ in the first ID Type dropdown listbox
• The Connect Using Secure Gateway Tunnel option
• ‘IP Address’ in the second ID Type dropdown listbox
b. Enter the static IP address of the LANtronix box in the first IP Address
field.
c. Enter the static IP address of the SafeNet/Speed box in the second IP
Address field.
6. Expand LANtronix Panel 001. With ‘My Identity’ highlighted:
a. Make sure the following options are selected:
• ‘IP Address’ in the ID Type dropdown listbox
• ‘None’ in the Select Certificate dropdown listbox
• ‘Any’ in the Name dropdown listbox
b. Click [Pre-Shared Key].
7. Click [Enter Key].
8. Enter the same key (key A) that was entered on the SafeNet/Speed box in
step 20 of Step 2: Configuring the SafeNet/Speed Box on page 304, then
click [OK].
9. With LANtronix Panel 001 expanded and ‘Security Policy’ highlighted:
a. Select the Main Mode option.
b. Select the Enable Replay Detection checkbox.
10. With LANtronix Panel 001 expanded and ‘Proposal 1’ beneath
‘Authentication (Phase 1)’ highlighted:
a. Make sure that the following are selected:
• ‘Pre-Shared Key’ in the Authentication Method dropdown listbox
•‘SHA-1’ in the Hash Alg dropdown listbox
• ‘Diffie-Hellman Group 1’ in the Key Group dropdown listbox
b. In the Encrypt Alg dropdown listbox, select ‘Triple DES’.