User guide

N: Encryption
300 —
revision 143
The steps to configure encryption for use with B.A.S.I.S. are:
1. Setup and configure the hardware
2. Configure the SafeNet/Speed box
3. Install SafeNet/Soft-PK on the server and client
4. Configure SafeNet/Soft-PK peer-to-peer encryption on the server
5. Configure SafeNet/Soft-PK peer-to-peer encryption on the workstation
6. Configure SafeNet/Soft-PK peer-to-panel encryption on the workstation
The following diagram illustrates the hardware set up needed to use encryption
with B.A.S.I.S.: