User guide

Installation & Setup User Guide
revision 143 — 279
the copy from the user’s home directory is used. This means that you could
end up with multiple copies of the ACS.INI file.
Note that all copies might not exist on the Server. If a user’s home directory
is mounted from a public server, the ACS.INI file will exist there. This is
true even when you log directly into the Server.
• Multiple monitoring instances will attempt to write to the activity
printer and CCTV in Windows Terminal Server environment. If
multiple instances of Alarm Monitoring are started on the same Windows
2000 Server machine and Monitoring on that Server machine is configured
to have an activity printer and/or CCTV device, then all instances of Alarm
Monitoring will attempt to write to that activity printer and CCTV device.
The first Alarm Monitoring instance will get access to the needed ports, and
subsequent instances that startup will get errors trying to open the ports.
Procedures
Step 1: Installing Required Applications
1. Install and configure Windows 2000 with Terminal Services on the server.
Configure Windows Terminal Services for Application Mode with Windows
2000 permissions.
2. Configure all network protocols (TCP/IP, IPX, SPX, NetBIOS) that will be
used for ICA/ALE connections in Windows.
Step 2: Installing Citrix MetaFrame on the Server
To install Citrix MetaFrame, refer to the “Installation” section of the Citrix
MetaFrame Administrator’s Guide.