User guide

8: Installing and Configuring WirelessOffice Messaging Software Version 5.0
102 —
revision 143
Linkage Server Host section on the System Options form in System
Administration. For more information, refer to step 7 on page 104.
10. Click [Test Connectivity…].
11. If all goes well, the Last Connect Attempt and Last Login Attempt will be
updated to ‘OK’. Your window should look like the following:
Note: If the test for connectivity fails, it is possible that name resolution is not
setup on your network. Try specifying the IP Address of the server instead of
the name in the Server field on the WirelessOffice tab.
12. Verify that the “File Messenger” and “WirelessOffice Server” services have
a Status of “Started” and a Startup value of “Automatic”. To do this:
a. Click the Windows Start button, then select Settings > Control Panel.
b. Open the Administrative Tools folder and double-click on the Services
icon, and the Services window (shown) will be displayed.
c. Scroll through the Name column. The “File Messenger” and
“WirelessOffice Server” services should have a Status of “Started” and
a Startup Type value of “Automatic”. If they do not:
– To change the Startup value to “Automatic”, select the service that
needs to be changed, right-click on the service and select