Datasheet

DiamondMax 20 PATA Product Manual, Rev. A 5
*One Gbyte equals one billion bytes when referring to hard drive capacity. Accessible capacity may vary depending on operating environment
and formatting.
**During periods of drive idle, some offline activity may occur according to the S.M.A.R.T. specification, which may increase acoustic and
power to operational levels.
Vibration, nonoperating 5–22 Hz: 0.25 G, Limited displacement
22–350 Hz: 5.0 G
350–500 Hz: 1.0 G
5–22 Hz:
Limited displacement
23–350 Hz: 5.0 G
Drive acoustics, sound power (Bels)
Idle** 2.7 (typical)
2.9 (max)
2.7 (typical)
2.9 (max)
2.8 (typical)
3.4 (max)
Quiet seek 3.0 (typical)
3.2 (max)
3.0 (typical)
3.2 (max)
3.7 (typical)
3.9
Nonrecoverable read errors 1 per 10
14
bits read
Annualized Failure Rate (AFR) 0.34%
Warranty 3 years on distribution units.
To determine the warranty for a specific drive, use a web browser to access the
following web page:
www.seagate.com/support/service/
From this page, click on the “Verify Your Warranty” link. You will be asked to pro-
vide the drive serial number, model number (or part number) and country of pur-
chase. The system will display the warranty information for your drive.
Contact start-stop cycles 50,000 at 25°C, 50% rel. humidity
Drive specification STM3300622A STM3250624A STM3250623A