Product manual

22 Scorpion 40 DDS-4 Product Manual, Version A
Ultra2 SCSI 68-pin high-density connector
pin 34
pin 68
pin 35
pin 1
Figure 11. Interface and power connectors on internal Scorpion 40
SCSI Termination
The internal Scorpion 40 does
not provide SCSI termination. For this reason, it
should not be the last device on a SCSI chain. Two termination examples are shown
in Figure 12 below. If the drive is the only SCSI device, attach the drive to the
connector which is next to last on the SCSI chain and attach a multi-mode terminator
to the last connector in the chain.
SCSI Controller
(termination enabled)
Scorpion 40
Tape drive
SCSI device
SCSI device
(
termination
enabled
)
(
termination
disabled
)
(no
termination )
SCSI Terminator
SCSI Controller
(termination enabled)
Scorpion 40
Tape drive
(no
termination )
Figure 12. Two SCSI termination examples for internal Scorpion 40.