User guide

2. Setting Up GoFlex Home – Windows Step 2: Connecting GoFlex Home
FreeAgent® GoFlex™ Home User Guide 11
3. Dock the drive into the base, then press the Power button.
a. Align the connector on the bottom of the drive with the connector in the base.
b. Gently press down on the drive until it clicks into place.
c. Press the Power button.
4. Wait for the lights on the front of GoFlex Home to stop blinking. This may take a couple of
minutes.
If the GoFlex Home light is not solid green, wait about two minutes to make sure that GoFlex
Home has had a chance to fully start up; if it’s blinking amber, GoFlex Home either can’t
connect to the network or can’t communicate with the drive. See “Solving Problems” on
page 72 for more help.
Figure 5: Docking the GoFlex Drive
Figure 6: GoFlex Home Lights
GoFlex Home Light:
Solid green when ready
Drive Light:
Solid white when ready