Operation Manual

9. Customizing Your Media Player Settings Changing the Menu Language
Media Player User Guide 58
Adjusting the Digital Output Settings
To adjust the digital output settings to meet the needs of your audio equipment:
1. On the Audio screen, select Digital Output, then press OK.
2. Select the setting you want:
• S/PDIF LPCM—Converts multi-channel audio into stereo.
• S/PDIF RAW—Plays digital audio without decoding.
• HDMI LPCM 2CH—Converts multiple audio channels into only a left and a right channel.
Use this setting when only two speakers are available.
• HDMI LPCM Multi CH—Supports multiple audio channels. Use this setting for surround
sound when multiple speakers are available.
• HDMI RAW—Is not decoded by the media player. When you use this setting, you must
connect the media player to a receiver with decoding capabilities.
Changing the Menu Language
To change the menu language used by your media player:
1. On the Home screen, press Menu, select Settings, then press OK.
2. Press Menu, select System Setup, then press OK.
OR
Use the left and right arrows on the remote to scroll through the Settings screens until you find
the System screen.
3. On the System screen, select Menu Language, then press OK.
4. Select the language you want, then press OK.
The menu language changes.
Changing the Media Player Screensaver
After five minutes of inactivity on your media player, a screen saver opens. If you want, you
can use a slideshow of your own pictures as the screensaver, instead of the default Seagate
logo.
Note: The screensaver runs for 60 minutes. After 60 minutes, the media player turns itself off.
To use a picture slideshow as the screensaver:
1. On the Home screen, press Menu, select Settings, then press OK.