Specifications

42 Savvio SCSI Product Manual, Rev. C
9.2 SCSI interface messages supported
Table 12 lists the messages supported by the SCSI-2 and SCSI-3 modes of the Savvio SCSI family drives.
Notes.
[1] Extended messages (see the SCSI Command Reference Manual).
[2] Supports all options except qas_req and iu_req.
Table 12: SCSI messages supported by Savvio SCSI family drives
Message name Message code Supported
Abort 06h Y
Abort-tag 0Dh Y
Bus device reset 0Ch Y
Clear ACA 16h N
Clear queue 0Eh Y
Command complete 00h Y
Continue I/O process 12h N
Disconnect 04h Y
Extended messages 01h[1] Y
Identify 80h-FFh Y
Ignore wide residue (two bytes) 23h Y
Initiate recovery 0Fh N
Initiator detected error 05h Y
Linked command complete 0Ah Y
Linked command complete with flag 0Bh Y
Message parity error 09h Y
Message reject 07h Y
Modify data pointer [1] N
No operation 08h Y
Parallel Protocol Request Y
Queue tag messages (two bytes)
ACA 24h N
Head of queue tag 21h Y
Ordered queue tag 22h Y
Simple queue tag 20h Y
Release recovery 10h N
Restore pointers 03h Y
Save data pointer 02h Y
Synchronous data transfer req. [1] Y
Target transfer disable 13h N
Terminate I/O process 11h N
Wide data transfer request [1] Y