User Manual
Table Of Contents
- 5400 RPM - SATA Product Manual
- Seagate® Technology Support Services
- 1.0 Introduction
- 2.0 Drive Specifications
- 2.1 Formatted Capacity
- 2.2 Physical organization
- 2.3 Recording and Interface Technology
- 2.4 Physical Characteristics
- 2.5 Seek time
- 2.6 Start/stop times
- 2.7 Power Specifications
- 2.8 Environmental Specifications
- 2.9 Acoustics
- 2.10 Electromagnetic Immunity
- 2.11 Reliability
- 2.12 Agency and Safety Certifications
- 2.13 Safety certification
- 2.14 Environmental protection
- 2.15 Corrosive Environment
- 3.0 Configuring and Mounting the Drive
- 4.0 Serial ATA (SATA) Interface
Seagate FireCuda Product Manual, Rev. H 32
Serial ATA (SATA) Interface
Table 14 Bit Descriptions
Description (if bit is set to 1)
Bit Word 63
0 Multiword DMA mode 0 is supported.
1 Multiword DMA mode 1 is supported.
2 Multiword DMA mode 2 is supported.
8 Multiword DMA mode 0 is currently active.
9 Multiword DMA mode 1 is currently active.
10 Multiword DMA mode 2 is currently active.
Bit Word 88
0 Ultra DMA mode 0 is supported.
1 Ultra DMA mode 1 is supported.
2 Ultra DMA mode 2 is supported.
3 Ultra DMA mode 3 is supported.
4 Ultra DMA mode 4 is supported.
5 Ultra DMA mode 5 is supported.
6 Ultra DMA mode 6 is supported.
8 Ultra DMA mode 0 is currently active.
9 Ultra DMA mode 1 is currently active.
10 Ultra DMA mode 2 is currently active.
11 Ultra DMA mode 3 is currently active.
12 Ultra DMA mode 4 is currently active.
13 Ultra DMA mode 5 is currently active.
14 Ultra DMA mode 6 is currently active.
Bit Word 93
13 1 = 80-conductor cable detected, CBLID above VIH
0 = 40-conductor cable detected, CBLID below VIL