User Manual
Table Of Contents
- 5400 RPM - SATA Product Manual
- Seagate® Technology Support Services
- 1.0 Introduction
- 2.0 Drive Specifications
- 2.1 Formatted Capacity
- 2.2 Physical organization
- 2.3 Recording and Interface Technology
- 2.4 Physical Characteristics
- 2.5 Seek time
- 2.6 Start/stop times
- 2.7 Power Specifications
- 2.8 Environmental Specifications
- 2.9 Acoustics
- 2.10 Electromagnetic Immunity
- 2.11 Reliability
- 2.12 Agency and Safety Certifications
- 2.13 Safety certification
- 2.14 Environmental protection
- 2.15 Corrosive Environment
- 3.0 Configuring and Mounting the Drive
- 4.0 Serial ATA (SATA) Interface
Seagate FireCuda Product Manual, Rev. H 31
Serial ATA (SATA) Interface
104 Streaming Transfer Time - PIO 0000
H
105 Reserved 0000
H
106 Physical sector size / Logical sector size 6003
H
107 Seagate reserved 0000
H
108-111
The mandatory value of the world wide name (WWN) for the drive. NOTE: This field
is valid if word 84, bit 8 is set to 1 indicating 64-bit WWN support.
Each drive will have a unique value.
112-118 ATA-reserved 0000
H
119 Free Fall Protection support (bit 5)
1 = Free Fall Protection supported
0 = Free Fall Protection not supported
120 Free Fall Protection enable/disable (bit 5)
1 = Free Fall Protection feature is enabled
0 = Free Fall Protection feature is disabled
121–127 ATA-reserved 0000
H
128 Security status 0021
H
129–159 Seagate-reserved xxxx
H
160–221 ATA-reserved 0000
H
222 Transport major version number 101F
H
223–254 ATA-reserved 0000
H
255 Integrity word xxA5
H
Note
See the bit descriptions below for words 63, 88 and 93 of the Identify Drive data. (on next page)
Table 13 Identify Device command
Word Description Value