Specifications

34 ST43401N/ND and ST43402ND Reference Manual, Rev. C
Table 13. Additional sense codes and their qualifiers
Byte 12 Byte 13 Description
00 00 No additional sense information
01 00 No index/sector signal
02 00 No seek complete
03 00 Peripheral device write fault
04 00 Logical unit not ready—cause not reportable
04 01 Logical unit is in process of becoming ready
04 02 Logical unit not ready—initializing command required
04 03 Logical unit not ready—mutual intervention required
04 04 Logical unit not ready—format in progress
05 00 Logical unit does not respond to selection
06 00 No reference position found (track zero or equivalent)
08 00 Logical unit communication failure
08 01 Logical unit communication time-out
08 02 Logical unit communication parity error
09 00 Track-following error
0A 00 Error log overflow
0C 01 Write error recovered with auto reallocation
0C 02 Write error—auto reallocation failed
10 00 ID CRC or ECC error
11 00 Unrecovered read error
11 01 Read retries exhausted
11 02 Error too long to correct
11 03 Multiple read errors
11 04 Unrecovered read error—auto reallocate failed
11 0A Miscorrected error
12 00 Address mark not found for ID field
13 00 Address mark not found for data field
14 00 Recorded entity not found
14 01 Record not found
15 00 Random positioning error
15 01 Mechanical positioning error
15 02 Positioning error detected by read of medium
16 00 Data synchronization mark error
17 00 Recovered data with no error correction applied
17 01 Recovered data with retries
continued