Specifications

ST43401N/ND and ST43402ND Reference Manual, Rev. C 13
Drives and initiator in separate cabinets
Initiator
Drive
2
Drive
3
Drive
0
Drive
1
Unshielded
Terminator
Flat Cable
or
Twisted Pair
Bulkhead
Cabinet BCabinet A
Bulkhead
Shielded
Connector
Shielded
Cable
Shielded
Connector
Terminator
2 x 34 Pin
Connector
Notes:
1. Initiator in one cabinet (A).
2. All drives in another cabinet (B).
3. Both bulkheads have shielded connectors.
4. Flat cable can be used with single-ended drivers. Twisted-pair
flat cable must be used with differential drivers.
5. Total length of cables and stubs cannot exceed 25m (82.0 ft)
with differential drivers or 3.05m (10.0 ft) with single-ended
drivers.
Figure 8. Cabling with two cabinets