Specifications

iv Sun StorEdge A1000 and A3x00/A3500FC Best Practices Guide • November 2002
2.1.4 Local/Remote Switch 2–3
2.1.5 SCSI and Fiber-Optic Cables 2–3
2.1.6 SCSI ID, Loop ID, Controller, and Disk Tray Switch Settings 2–4
2.1.7 World Wide Name (WWN) 2–5
2.2 Adding or Moving Arrays to a Host With Existing A3x00 Arrays 2–6
2.3 Adding Disks or Disk Trays 2–6
2.3.1 Adding or Moving Disk Trays to Existing Arrays 2–7
2.3.2 Adding or Moving Disk Drives to Existing Arrays 2–7
2.4 Setting Up 2x7 and 3x15 Configurations, and Converting 1x5 to 2x7 or
3x15 2–8
2.5 Sun StorEdge A3500/A3500FC Lite 2–9
2.6 Cluster, Multi-Initiator, and SCSI Daisy Chaining Configurations 2–10
2.6.1 Cluster Information 2–10
2.6.2 Multi-Initiator Information 2–11
2.6.3 SCSI Daisy Chaining Information 2–11
2.7 Supported Configurations 2–11
2.7.1 Maximum Server Configurations 2–12
2.7.2 Onboard SOC+ 2–12
2.7.3 Second Port on the SOC+ Card 2–13
2.7.4 Disk Drive Support Matrices 2–13
2.7.5 Independent Controller/Box Sharing 2–13
2.7.6 HBAs 2–13
2.8 SCSI to FC-AL Upgrade 2–14
3. RAID Manager Installation and Configuration 3–1
3.1 InstallationandConfigurationTips, TunableParameters,andSettings 3–2
3.1.1 Software Installation 3–2
3.1.2 Software Configuration 3–3
3.1.3 RAID Module Configuration 3–3