Specifications

Index-5
sd_max_throttle setting, 4–3
SDS, 4–13
second port on the SOC+ card, 2–13
sequencer
power, 2–3
serial cable, 1–5
serial port access, 1–5
service information, 5–1
setting up 2x7 and 3x15, 2–8
SNMP, 4–11
trap data, 4–11
SOC+, 2–12
software
configuration, 3–3, 4–1
guidelines, 5–16
information, 5–17
installation, 3–2, 4–1
new installation, 4–2
Solaris kernel driver, 4–2
Solaris x86, 1–6
Solstice Disksuite (SDS), 4–13
Sonoma Engineering web site, 1–4
specifications
electrical, A–5
power consumption, A–5
Storage ACES web site, 1–4
storutil command, 2–6
Sun
Cluster information, 2–10
Download Center, 1–4
Software Shop, 1–4
StorEdge A3500/A3500FC electrical
specifications, A–5
StorEdge A3x00/A3500FC Lite, 2–9
StorEdge D1000 tray common point of
failure, 5–5
StorEdge RSM tray common point of failure, 5–5
supported configurations, 2–11
switch local/remote, 2–3
sysReboot command, 2–9, 5–16
sysWipe command, 2–9, 5–16
T
template for filing a bug, 1–6
template for gathering debug information, A–3
thermal shutdown, recovering, 5–14
tip command, 1–6
tools and information, 1–3
troubleshooting overview, 1–1
tunable parameters and settings, 3–3
U
unresponsive controller, 6–2
upgrading
firmware, 5–18
RAID Manager 6 to 6.11 or 6.22, 4–2
SCSI to FC-AL, 2–14
to RAID Manager 6.22, 1–5, 3–2
use of RAID levels, 3–6
V
verifying
amount of cache, 5–13
backplane assembly, 5–7
controller boards, 5–8
D1000 FRUs, 5–7
D1000 tray functionality, 5–5
FRU functionality, 5–2
functionality of the disk drives, 5–3
functionality of the disk tray, 5–4
functionality of the power sequencer, 5–5
HBA, 5–8
paths to the A3x00/A3500FC, 5–8
RSM tray functionality, 5–5
VERITAS
adding or moving arrays, 4–13
enabling and disabling Volume Manager
DMP, 4–12
Volume Manager, 4–12
volume
labeling, 4–5
W
web sites, 1–4
dynamic reconfiguration information, 6–12
edist home page, 1–3
Enterprise Services FIN & FCO Program, 1–6
Enterprise Services Storage ACES, 1–4
Escalation Web Interface, 1–4
firmware information, 5–17