Technical information

4.5.17 PCI Fault Display Cable (AW-000982)
1. Open the cabinet front door.
2. Open the access door to the PCI backplane. (See Figure 4-3.)
Refer to Figure 4-61 when performing the following steps.
3. Disconnect the PCI fault display cable from the cabinet fault display PCB.
4. Pull the LED end of the cable out of the PCI fault LED receptacle.
Figure 4-61. Removing the PCI Fault Display Cable
4.5.18 Cabinet Fault Display PCB Cable (AW-000959)
1. Open the cabinet front door.
2. Open the access door to the PCI backplane. (See Figure 4-3.)
Refer to Figure 4-62 when performing the following steps.
3. Disconnect the cabinet fault display PCB cable from the PCI backplane.
4. Disconnect the other end of the cable from the cabinet fault display PCB.